KENLE industrial tumble dryers: E55 versus E75
For a high-throughput commercial laundry, drum capacity is only one part of the decision. Consider how much damp linen comes out of the washers, the type of textiles being processed and the available utility connections. KENLE currently lists two large-capacity industrial dryers in this category.
KENLE model specifications and confirmed heating configurations.
| Model |
Stated load |
Listed heating |
Dimensions W × D × H |
Details |
| KENLE E55 |
52–55 kg |
Electric, natural gas/LPG, optional steam |
1260 × 1635 × 1970 mm |
E55 technical page |
| KENLE E75 |
57–75 kg |
Electric, gas (natural gas/LPG), or optional steam |
1650 × 1660 × 2390 mm |
E75 technical page |
These are published catalogue specifications, not guaranteed cycle times or hourly throughput figures. Confirm the exact configuration and installation requirements before placing an order.
Gas-heated industrial tumble dryers: choosing the right configuration
Industrial gas tumble dryers can suit laundries with compatible infrastructure and frequent drying cycles. The E55 and E75 pages list natural gas and LPG heating options. The right choice depends on site-specific conditions, the rated equipment and the selected gas installation.
- Fuel: establish whether the site can accommodate natural gas or LPG.
- Ventilation: have the exhaust routing, fresh-air provisions and safety requirements checked by a qualified specialist.
- Workload: consider the number of daily loads and incoming moisture level, not only rated kilograms.
- Access: allow sufficient clearance for doors, filters, maintenance and linen handling.
Both KENLE E55 and E75 offer electric heating, gas heating (natural gas or LPG), or optional steam heating. Confirm the selected version and installation requirements when requesting a quotation.
Sizing an industrial dryer for a working laundry
A dryer should not be selected solely because its rated load matches the washing machine. Residual moisture following extraction, textile mix, peak operating hours and the number of consecutive cycles all affect the drying workflow. Request advice based on real site measurements and the expected production schedule.
Prepare these details before requesting an offer
- Daily and peak-shift quantities of towels, sheets, table linen and other goods.
- Number, capacity and extraction performance of existing washers.
- Room dimensions, door widths, access routes and space for service work.
- Gas supply, electrical power, any steam service and exhaust routing.
- Required controls or optional features, subject to model-specific confirmation.
For smaller-capacity machines, explore KENLE professional tumble dryers. This category focuses on large industrial E55 and E75 machines.
Industrial tumble dryer prices and quotations
Industrial tumble dryer prices depend on more than rated capacity. Heating source, accessories, installation work, delivery terms and optional controls can all affect the final quotation. KENLE does not publish fixed numerical prices on this category page, so a tailored written quotation is the appropriate next step.
Items to clarify when comparing industrial dryer quotations.
| Quotation item |
Information to confirm |
| Machine |
E55 or E75, with the selected load capacity |
| Heating |
Electric, natural gas/LPG, or optional steam for E55 and E75 |
| Site works |
Ventilation, utility connections and installation clearances |
| Supply conditions |
Freight, commissioning and included service scope |
| Options |
Control panel, optional monitoring and relevant accessories |
When comparing quotations, check which parts of the installation and supply are included and whether taxes, transport and commissioning are itemised. A headline price alone is not sufficient to evaluate a commercial laundry project.
Balancing washing and drying equipment
Drying capacity should be matched to the volume leaving the washing department. If washers are producing more damp linen than dryers can handle, queues build up and the entire process slows. Proper planning considers workflows, handling routes and available staffing.
For a wider project, see KENLE industrial washers and commercial laundry equipment. The general dryer range also includes smaller professional machines.
What to send KENLE for a suitable dryer recommendation
Include your type of operation, daily linen volume, fabric mix, available fuel supply and a plan or measurements of the installation room. Mention any existing washers and special access or service requirements.
With those details, KENLE can help you compare E55 and E75, discuss the available gas-heated industrial dryer configurations and provide model-specific quotation information.
Frequently asked questions about industrial tumble dryers
Which KENLE industrial tumble dryers are shown in this category?
The range shown here consists of the KENLE E55 with a 52–55 kg capacity and the E75 with a 57–75 kg capacity. Compare workload, physical dimensions and available utilities before selecting a model.
How much does a KENLE industrial tumble dryer cost?
Prices are supplied by quotation and depend on the model, heating configuration, optional equipment, delivery and installation scope. No fixed numeric price list is published on this category page.
Does KENLE offer gas-heated industrial tumble dryers?
Yes. Both E55 and E75 product descriptions list natural gas or LPG configurations. Installation requirements, ventilation and model-specific technical details must be checked for the actual site.
Is the KENLE E75 available with electric heating?
Yes. KENLE E75 is available with electric heating, natural gas or LPG heating, or optional steam heating. Confirm the selected configuration and technical requirements in the quotation.
What is the difference between the KENLE E55 and E75?
The E55 is rated for 52–55 kg and has published dimensions of 1260 × 1635 × 1970 mm (W × D × H). The E75 is rated for 57–75 kg and measures 1650 × 1660 × 2390 mm.
What information is needed for an industrial dryer quotation?
Provide the daily volume of laundry, textile types, number of operating shifts, available floor space, preferred heating source and any ventilation or maintenance-access constraints.
Considering the KENLE E55 or E75? Share your workload, site utilities and drying-room requirements to discuss a suitable configuration.
Contact KENLE
