KENLE soft mount washer-extractors: U10–U52 model comparison
KENLE’s high-spin U series includes seven industrial washer-extractors for different professional laundry workloads. Three figures are especially useful when comparing models: the rated dry-linen capacity, drum extraction speed in RPM and G-force, the acceleration achieved during spinning. Higher RPM alone does not always mean higher G-force on a different machine because drum diameter also matters.
KENLE U series: load capacity, extraction speed and G-force by model
| Model |
Capacity |
Extraction speed |
G-force |
| U10 |
10–12 kg |
1000 RPM |
348 G |
| U14 |
14–16 kg |
1000 RPM |
348 G |
| U18 |
18–20 kg |
900 RPM |
333 G |
| U22 |
22–24 kg |
900 RPM |
333 G |
| U28 |
28–30 kg |
850 RPM |
297 G |
| U35 |
35–38 kg |
760 RPM |
304 G |
| U52 |
50–52 kg |
760 RPM |
304 G |
These figures are taken from KENLE’s current category listings and product specifications. U10 and U14 cover 10–16 kg loads; U18, U22 and U28 address medium-capacity requirements; and U35 and U52 are options for larger loads. The right model depends on actual throughput, fabric mix and shift patterns rather than capacity alone.
Why choose a high-spin soft mount industrial washer?
High-speed extraction can help remove more water from compatible textiles before they reach the dryer. This is particularly relevant when wash cycles and drying capacity must be coordinated throughout a busy working day. Actual residual moisture and subsequent drying times depend on fabric type, loading, programme settings and the drying equipment: no fixed saving should be assumed for every load.
Professional laundries, hotels, care facilities and businesses processing towels, bed linen, table linen or uniforms often need predictable turnaround. Selecting the washer and dryer together can reduce unnecessary bottlenecks. You can review compatible options in the KENLE industrial tumble dryer range.
Choosing the right washer-extractor capacity
Start with the weight of dry linen handled daily, the average size of each batch and the number of operating hours available. The U10 and U14 may be considered for smaller batches and frequent cycles. The U18, U22 and U28 cover intermediate loads, while U35 and U52 are worth assessing for higher daily volumes.
Allow for fabric density, peak demand, loading and unloading time, programme length and the capacity of downstream equipment. A larger washer does not automatically deliver better productivity if loads are consistently too small or the dryer becomes the limiting step. For a wider selection, browse industrial washing machines and the 50 kg capacity category.
Soft mount versus hard mount: installation considerations
Soft mount and hard mount describe different approaches to supporting the machine during operation. KENLE’s U series is the high-spin soft mount range, while its F series covers hard mount washer-extractors intended for fixed installation on an appropriate base. A soft mount design should not be interpreted as a guarantee that any floor or location is suitable without technical checks.
Before ordering, assess floor conditions, delivery access, available working space, power supply, water connections and drains. Installation requirements must be confirmed against the chosen model’s current technical documentation and the building’s actual conditions.
Wash programmes, extraction control and laundry workflow
In addition to spin performance, KENLE describes programmable touch controls for the U series and provision for detergent-dosing connections. These features should be assessed according to the required model and configuration, especially when the facility runs different textile programmes or needs more structured operating procedures.
For a busy laundry team, clear loading routines, appropriate programme selection and accessible maintenance points can be as important as headline spin speed. Check the current product sheet for technical details and discuss any individual project specifications with KENLE before finalising a purchase.
Soft mount washer-extractor prices and quotations
Industrial washer-extractor pricing varies with capacity, specification, optional equipment, delivery requirements and installation conditions. Rather than comparing an unverified list price, it is more useful to prepare a specification covering expected laundry throughput, fabric types, number of daily cycles and utilities available on site.
KENLE can discuss machines configured to individual project requirements and provide a quotation based on the information supplied. Contact KENLE to request a quotation.
Frequently asked questions about soft mount washers
What does G-force mean on a washer-extractor?
It describes acceleration during the extraction phase, expressed relative to gravity. The current KENLE U-series category lists values between 297 G and 348 G, depending on the model.
Is extraction speed the same as G-force?
No. RPM measures drum revolutions per minute. G-force is influenced by RPM and drum diameter, so both specifications matter when comparing machines.
Will high-spin washing always shorten drying time?
It can reduce residual moisture in suitable loads, but the outcome varies by fabric, batch size, spin programme and dryer performance. A fixed reduction in drying time cannot be guaranteed.
How do I select a model and request a price?
Share the average dry-linen load, daily cycle count, textile types and site constraints. KENLE can help compare suitable models and discuss a specification-based quotation.
